Description

The 22mm ” End Feed Straight Tap Connector joins 22mm copper tube to a ” BSP tap or valve tail. It has a soldered capillary end for the copper tube and a swivel union nut with a fibre washer at the threaded end, so the tail seals without jointing compound and can be undone for servicing. Used where a 22mm supply feeds a ” tap, bath or appliance. Manufactured from copper to BS EN 1254-1 and fits copper tube to BS EN 1057.

Also known as: tap connector, straight tap connector, tap tail connector, tap coupling, swivel tap connector, inch tap connector, 22mm tap connector, endfeed tap connector.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Connects 22mm tube to a ” tap/valve tail swivel nut and washer
• Straight pattern
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: couplers, elbows and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.