Description

The S.R. Smith 18″ commercial mounting kit, part 67-209-903-SS, is the hardware set for mounting a commercial diving board. It is supplied with .5 x 5″ carriage bolts.

Board length matters

S.R. Smith lists this kit for 10 ft and 12 ft boards only. Before ordering, confirm the length of the board it is going under, because a kit built for one board length is not interchangeable across the range.

Use the factory hardware

Diving board mounting hardware carries repeated shock loading, so it is worth using the kit S.R. Smith specifies rather than assembling equivalents from a hardware store.