Description

The FlexiGas DS 15mm Contractor Kit 5m with 2x Copper Unions is a complete job in a box: a 5-metre coil of Kitemark-certified FlexiGas DS pre-sleeved double layered CSST gas pipe, two FlexiGas-to-copper compression unions and a free roll of silicone tape. With its built-in sleeve it passes through 100% of installation scenarios straight out of the box walls, floors, screed and unvented voids and installs up to 4x faster than copper.

Built-in sleeve to BS 6891 & IGEM/UP/2, 3 & 7 | BSI Kitemark KM 598726, EN 15266 | Connects direct to copper | Silicone tape included

What’s in the Kit

• 5m FlexiGas DS-15 (15mm) double sleeved CSST pipe inner gas-carrying CSST inside a V0 fire-rated sleeve that meets the UK definition of a sleeve, so no extra sleeving on site; suitable for solid walls, floors, screed, soil and unvented voids.
• 2x FlexiGas-to-copper compression unions dezincification-resistant brass with a 100% metal-to-metal seal in seconds; connect each end straight onto copper pipework.
• 1x roll of yellow silicone tape to wrap the gap at the fitting tail once the gas tightness test is complete.

Specifications

Ideal For

Gas Safe engineers running a short 15mm feed through walls, floors or screed where sleeving would otherwise be needed the DS kit covers the run, both copper connections and the sleeve requirement in one box.