Description

The FlexiGas 40mm Contractor Kit 5m with 2x Copper Unions is a complete job in a box: a 5-metre coil of Kitemark-certified FlexiGas DN40 CSST gas pipe, two FlexiGas-to-copper compression unions and a free roll of silicone tape. Bend it by hand, connect straight onto copper at each end and install up to 4x faster than copper no soldering, sealants or specialist tools.

Everything for one run in a single box | BSI Kitemark KM 598726, EN 15266 | Connects direct to copper | Silicone tape included

What’s in the Kit

• 5m FlexiGas DN40 (40mm) CSST pipe bends by hand for a continuous run with no joints; fire-retardant, UV-resistant yellow jacket (B-s1 d0), suitable for direct burial in screed or ground.
• 2x FlexiGas-to-copper compression unions dezincification-resistant brass with a 100% metal-to-metal seal in seconds; connect each end straight onto copper pipework.
• 1x roll of yellow silicone tape to wrap the gap at the fitting tail once the gas tightness test is complete.

Specifications

Ideal For

Commercial gas engineers making 40mm connections to plant rooms and commercial kitchen equipment one box covers the run and both copper connections.