Description

The 54mm 35mm End Feed Reducing Coupler is an external reducer that joins 54mm copper tube to 35mm copper tube in a straight run with a soldered capillary joint. Socket both ends, it fits over the outside of the tube steps large 54mm plant room headers and risers down to 35mm. Manufactured from copper to BS EN 1254-1 and fits copper tube to BS EN 1057.

Also known as: external reducer, external coupler, external reducing coupler, reducing coupling, reducing socket, copper reducer, pipe size reducer, 54-35mm coupler, capillary reducing coupler, endfeed reducing coupler.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduces 54mm to 35mm external, socket both ends
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: straight couplers, fitting reducers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.