Description

The 35mm 28mm 35mm End Feed Reducing Tee connects 35mm and 28mm in line (the run) with a 35mm branch at 90. A reduced-end tee one end of the run steps down to 28mm while the other end and the branch stay 35mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.

This is a reduced-end tee the two run ends are different sizes (35mm and 28mm).

Also known as: reducing tee, end reduced tee, reducing end tee, unequal tee, 35x28x35 tee, endfeed reducing tee.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduced-end tee 35mm 28mm 35mm
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.