Description

The 28mm 22mm 15mm End Feed Reducing Tee connects 28mm and 22mm in line (the run) with a 15mm branch at 90. A reduced end-and-branch tee off the 28mm inlet, one run end steps down to 22mm and the branch is a reduced 15mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.

This is a reduced end-and-branch tee a run end (22mm) and the branch (15mm) are both reduced from the 28mm end.

Also known as: reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 28x22x15 tee, endfeed reducing tee.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduced end-and-branch tee 28mm 22mm 15mm
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.