Description

The 22mm 15mm 22mm End Feed Reducing Tee connects 22mm and 15mm in line (the run) with a 22mm branch at 90. A reduced-end tee one end of the run steps down to 15mm while the other end and the branch stay 22mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.

This is a reduced-end tee the two run ends are different sizes (22mm and 15mm).

Also known as: reducing tee, end reduced tee, reducing end tee, unequal tee, 22x15x22 tee, endfeed reducing tee.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduced-end tee 22mm 15mm 22mm
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.