Description

The 22mm 15mm 15mm End Feed Reducing Tee connects 22mm and 15mm in line (the run) with a 15mm branch at 90. A reduced end-and-branch tee off the 22mm inlet, one run end steps down to 15mm and the branch is 15mm too. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.

This is a reduced end-and-branch tee a run end (15mm) and the branch (15mm) are both reduced from the 22mm end.

Also known as: reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 22x15x15 tee, endfeed reducing tee.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduced end-and-branch tee 22mm 15mm 15mm
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.