Description

Ford Antenna Mounting Bracket & Cable’No Hole’ Antenna Mounting Bracket allow you to mount your antenna without damaging your truck SUV. These brackets use your vehicle’s existing fender bolts to secure the mount. Protecting your vehicle’s paint.Fits 2021 – 2027 – Ford F-150 (DRIVER’S SIDE)Bracket: Stainless Steel ConstructionAntenna Mounting Hole: 3/4-Inch (16 mm) Antenna Mounting HoleCoaxial Cable & Length: 17-Feet / RG-58ANMO Cable & Bracket Installation Quick Instructions1. Attach the NMO Cable to the BracketUnscrew and remove the NMO connectors outer ringInsert the cable-mounted NMO connector through theunderside of the bracketReinstall and tighten the outer ring, keeping the connector centered in the bracket2. Install the Mounting BracketSet the parking brake and open the hoodLocate and remove the 10 mm bolt near the rear of the front fenderPosition the bracket over the bolt hole and reinstall the boltTighten securelyImportant: To help prevent galvanic corrosion between the aluminum body and stainless-steel bracket, place the stainless-steel star washer only between the bolt head and bracket. Do not allow the washer to penetrate or contact the aluminum body surface.Refer toFord Service Bulletin: Q-222R1[STAFF NOTE]Due to weight considerations, installing the ATAS-120 or similar HF antennas is not recommended. These antennas are generally heavier than most VHF/UHF dual-band antennas. Some customers have reported slight wobble when using heavier HF antennas with the FO4 bracket. The brackets right-angle design, combined with the additional weight, may result in reduced stability.