Description

The 15mm 8mm End Feed Long Tail Fitting Reducer is an internal reducer with an extended 15mm spigot (the long tail) that pushes inside a 15mm fitting, and an 8mm socket that takes 8mm copper tube. The longer tail gives extra reach into the fitting and a little adjustment on awkward or deep joints. Joined with a soldered capillary joint and suitable for hot and cold water and central heating. Manufactured from copper to BS EN 1254-1 and fits copper tube to BS EN 1057.

Also known as: long tail reducer, long fitting reducer, extended reducer, long spigot reducer, internal reducer, male reducer, 15-8mm long reducer, endfeed long tail reducer.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduces a 15mm fitting to 8mm tube internal, long tail spigot one end, socket the other
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: straight couplers, reducing couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.