Description

The 15mm 15mm 22mm End Feed Reducing Tee runs at 15mm on both ends with a larger 22mm branch at 90. A reduced-ends tee the branch is the biggest connection, so both run ends are effectively reduced relative to it. Handy where a 22mm branch is taken from a 15mm run. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057.

This is a reduced-ends tee both run ends (15mm) are smaller than the 22mm branch.

Also known as: reducing tee, reduced ends tee, both ends reduced tee, unequal tee, 15x15x22 tee, endfeed reducing tee.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduced-ends tee 15mm 15mm 22mm
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.