Description

The FlexiGas 15mm Contractor Kit 10m with 2x Copper Unions is a complete job in a box: a 10-metre coil of Kitemark-certified FlexiGas DN15 CSST gas pipe, two FlexiGas-to-copper compression unions and a free roll of silicone tape. Bend it by hand, connect straight onto 15mm copper at each end and install up to 4x faster than copper no soldering, sealants or specialist tools.

Everything for one run in a single box | BSI Kitemark KM 598726, EN 15266 | Connects direct to copper | Silicone tape included

What’s in the Kit

• 10m FlexiGas DN15 (15mm) CSST pipe bends by hand for a continuous run with no joints; fire-retardant, UV-resistant yellow jacket (B-s1 d0), suitable for direct burial in screed or ground.
• 2x FlexiGas-to-copper compression unions dezincification-resistant brass with a 100% metal-to-metal seal in seconds; connect each end straight onto copper pipework.
• 1x roll of yellow silicone tape to wrap the gap at the fitting tail once the gas tightness test is complete.

Specifications

Ideal For

Gas Safe engineers running a 15mm feed across the house to a hob, fire or appliance one box covers the whole job with copper connections at each end.