Description

The 28mm 15mm End Feed Reducing Coupler is an external reducer that joins 28mm copper tube to 15mm copper tube in a straight run with a soldered capillary joint. Socket both ends, it fits over the outside of the tube steps a 28mm primary or main down to a 15mm branch in one fitting. Manufactured from copper to BS EN 1254-1 and fits copper tube to BS EN 1057.

Also known as: external reducer, external coupler, external reducing coupler, reducing coupling, reducing socket, copper reducer, pipe size reducer, 28-15mm coupler, capillary reducing coupler, endfeed reducing coupler.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• Reduces 28mm to 15mm external, socket both ends
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: straight couplers, fitting reducers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.