Description

The 10mm End Feed Street Elbow 90 turns a run of 10mm copper tube through a right angle, with one male (spigot) end and one female (socket) end. The male end pushes straight into another fitting while the female end takes tube, saving a coupler and tightening up the joint. Soldered capillary joint, used on 10mm microbore heating pipework. Manufactured from copper to BS EN 1254-1 and fits copper tube to BS EN 1057.

Also known as: street elbow, street bend, male female elbow, MxF elbow, spigot elbow, 90 degree street elbow, 10mm street elbow, endfeed street elbow.

• Manufactured to BS EN 1254-1 for capillary (solder) fittings
• 90 street elbow one male end, one female end
• Fits copper tube to BS EN 1057
• WRAS approved
• Solder and flux required not supplied
• Sold individually buy exactly what the job needs
• Suitable for hot and cold water and heating services

End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings.

Also in this range: standard elbows, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.